關閉列表

設備文本介紹:↓

優質是其根本

●主傳動通過王軸，傳動直徑0250毫米的滾盤帶動錠子運轉。中墻板采用框式結構，【型龍筋，角尺型短機粱，緊湊穩固機架重心低，可適應各種升降動程。

●能生產預定紗線長度的優質管紗，升降杠桿采用蝸輪箱傳動單葉成形凸輪，凸輪的形狀使管紗成形

能適應自動絡筒機的高速退繞。

●牽伸結構卷與繞結構是經過大量科學實驗的最優化設計。雛生產最好的紗線，最少斷頭率。在適紡

纖維種類和纖維長度方面通用l生強，范圍大。

●各種國產棉型搖架廈SKF搖架、l NA與RIETER氣加壓搖架均可配套的牽伸系統．并可選配清潔前羅拉

的磁性絨輥，選用錠盤直徑m 22mm或tl- 20 5mm的

ITS? PRINCIPAL-HIGH? QUALITY

●For main driving the tension pulley with diameter of 250mm which is driven by the mainshaft is to drive the spindles to run. The spring piece adopts a frame-type design,【-shape? short splndle rail and angle square-type short roller stand. which is compact and stable,with a low center of gravity suitable for all kinds of lifting motions.

●Able to produce excellent cops for presetting length. As for lifting lever. worm wheel box is used to drive the single builder cam, whose shape makes the cop formation suitable for the high-speed unwinding of automatic conewinder.

●The drafting and winding construction is the optimal design through lots of scientific

experiments it can produce the best yarn with the lowest breakage. it is versatile andwidelyused with respect to spinnable fibre type and fibre length

●??????Its drafting system can be equipped with all kinds of stateproduce cotton type pendulumarms. SKF. INA and RIETRER pendulum arms Magnetic clearing roll can also be selectedto clean the front roller it is optional to use the low-noise power-saved spindle with thespindle wharve diameter of 22mm or205mm

高效是其目標

●機身窄，左右錠子中心距680毫米，空間利用率大。

●FA/FB507型細紗機除了有可的工藝性來保證紗線質量外，其制造陛同樣是精良的。傳動齒

輪均采用優質鋼。高速級傳動采用同步齒形帶，安裝方便，噪音低。牽伸傳動齒輪采用斜齒，平

穩可靠。

●采用高強度平皮帶傳動主軸，配用變頻器調節錠速。可選用6/4極雙速高效節能電機。

●根據粗紗卷裝大小，可選配單層四排（適應粗紗最大直徑0 1 3 5毫米）或單層六排（適應粗紗最

大直徑d.152毫米）的紗架。

●風箱密封性能好。

ITS? OBJECTIVE-HIGH? EFFICIENCY

●Narrow machine width. the distance betweenthe centers of the two opposite spindles on

either side of the machine is 680mm, whichutilize the space effectively.

●Besides the reliable technology to ensure theyarn quality, the ring spinning frame is

exquisitely manufactured. High-quality steel isadopted for all driving gears of overall

machine For high speed driving.Helical timingbelt is used lo ensure convenient erection and

low noise Helical gears are chosen for draftingand driving gears, which make them stable and

reliable

●Use high-tension flat belt to drive the main shaft. equip it With inverters to adjust spindle

spaed. choose to equip it with 6;4 polesdoublespeed high-efficiency motor which

saves power

●According to the roving package size.chooseto equip single-layer 4-row creel(suitable for

roving with max dia of 135mm)?or?single-layer6-row creel (suitable for roving whith max. dia

Of 152mm)

●Suction box sealed well by silica gel

自動化程度

●最早采用國際先進水平的程序控制器及變頻速器。

●運轉中能數字顯示前羅拉線速度、錠速、捻度、定長和班產。

●紡紗過程中任何時候關機，能自動適位停機。

●需要時，可使鋼領板提前自動下降及自動適位停機。

●紡紗至規定紗線長度時，可使鋼領板自動下降及自動適位停機。

●開機前能使鋼領板自動復位：

●在紡紗過程中，可自動變速，亦可手動變速。

●配用電動落紗機，落紗前能自接通落紗機電源．，

HIGH? AUTOMATION

●First adopt the internationally advanced programme controller and the speed-adjusting inverter

●While the machine is running. digital? display can show the linear speed of front roller, spindle speed, twist range.presetting length and shift output

●The frame can stop at a praper position automatically, whenever lt is required? during the spinning process

●If needed. the r Jng rail can wing down? automatically in advance and the machine can stop automatically ata proper position

●When? spinning? the? yarn? to the? presetting length. the ring rail will wing? down and stop automatically at a proper pasition

●Before starting the machine, the ring? rails W…reset themselves at the sta rting position automatically

●During spinning process, the spindle speed can be changed automatically?or?manually

●Equipped with auto-doffer, the power supply will be put through automatically before doffing

操作與管理可

●車頭傳動及牽伸傳動，有滴濁潤滑裝置進行定時定量滴油，保證機器正常遠轉。

●傳動齒輪采用統一模數、孔徑和寬度，各種變換齒輪互相間可通用，減少了備用齒輪的品種和數量。

●有適用于棉型笛管和適用于中長纖維支管的斷頭吸入裝置。

●各種控制與操作開關，集中于車頭面板上。

●車頭與車尾比機身窄使用電動蓓紗機時毋需預拔紗管

●To ensure tha normal running ofthe frame, the driving and fixed time by the lubrication system

●Change gears for drafting,twisting,and winding are of the same modula.bore diameter and width. and therefore

spare gears.

●Equipped with the broken yarn and suction device,which can borh fit to cottoh-type flute and fibre Sub-pipe

●All the conrtolling and operating buttons are concentrated on the pannei of the headstock.

●Since both the headstock and the endstock are more narrow Than the middle portion,it is unnecessary to pull out the bobbins

in advance befora auto-doffing

技術參數/Main?? spcifications

機器底腳圖/Floor space of the machine

設備配置及報價介紹

FA503細紗機基本配件名稱??????產?地

錠子??上海

羅拉??常州

搖架??常德

皮輥軸承????上海

備注：本廠細紗機一律以上海紡機為標準，按山西經緯標準為依據，設備配置精良，產品質量可靠，售后服務完善。